VW Amarok Parking Sensor Issue

You may encounter the parking sensors of your VW Amarok not working/showing after installing the headunit. Here's what you can do:

1. Check if the parking sensors is enabled

In your dash, look for the parking sensor button and make sure it is enabled.

2. If that didn't work, you can try this:

Check the tag on your Vhedia headunit CANBUS box (located in the main harness), and change the CANBUS setting based on your CANBUS box tag below:

If you see:

VW-SS-07 or VW-SS-06, select CAN BUS Setting No. 7:VW(Simple,Raise)

Meanwhile, if it says:

VW-SS-05A, Select CAN BUS Setting No. 13 VW-GOLF7(Simple,Raise)

To change the CAN BUS setting, go to your head unit and tap on Settings - Car Settings - Factory Settings - Enter 126 for password - CAN BUS - CAN BUS Settings - then select the appropriate one based on what is mentioned above.